Installation

AUDIO / VISUAL: RADIO RECEIVER: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL NO. 2 RADIO BRACKET





(a) Install the bracket with the 4 bolts.

2. INSTALL NO. 1 RADIO BRACKET





(a) Install the bracket with the 4 bolts.

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY





(a) Attach the 2 clips and 2 claws to install the panel.

4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

(a) Connect the connectors.

(b) Insert the radio receiver to attach the 6 clips, 2 claws and 3 ribs on its backside

NOTICE:
When inserting the radio receiver, do not press the knobs on it.





(c) Install the radio receiver with the 2 bolts.





5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

6. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY Installation

7. INSTALL NO. 3 BOX PANEL Installation

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL COWL TOP VENTILATOR LOUVER RH Installation