Removal

ENGINE HOOD / DOOR: TRUNK LID ACTUATOR: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

4. REMOVE ROPE HOOK Removal

5. REMOVE DECK TRIM SIDE BOARD LH Removal

6. REMOVE DECK TRIM SIDE BOARD RH Removal

7. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Removal

8. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler) Removal

9. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) Installation

10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER Removal

11. REMOVE REAR FLOOR FINISH PLATE Removal

12. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Removal

13. REMOVE LUGGAGE CLOSER MOTOR ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 3 bolts and nut.

(c) Remove the luggage closer motor.