Installation

AIR CONDITIONING: SMOG VENTILATION SENSOR: INSTALLATION

1. INSTALL SMOG VENTILATION SENSOR





(a) Install the sensor with the bolt.

Torque : 9.8 Nm (100 kgf-cm, 7 ft-lbf)

(b) Connect the connector.

2. INSTALL COOL AIR INTAKE DUCT SEAL

(a) Install the duct seal with the 2 clips.

3. INSTALL AIR CLEANER INLET COVER

(a) Install the cover with the 2 clips.

4. INSTALL ENGINE ROOM SIDE COVER LH

(a) Install the cover with the 4 clips.

5. INSTALL ENGINE ROOM SIDE COVER RH

(a) Install the cover with the 4 clips.