Installation

POWER STEERING: DC / DC CONVERTER: INSTALLATION

1. INSTALL DC-DC CONVERTER

(a) Install the converter with the 3 bolts.





Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

(b) Connect the 2 converter connectors A and B, and securely lock the connectors.





2. INSTALL BATTERY TRAY

(a) Install the battery tray with the 3 bolts.

Torque : 5.4 Nm (55 kgf-cm, 47 in-lbf)

3. INSTALL BATTERY

(a) Install the battery.

(b) Install the battery insulator.

(c) Install the battery clamp with the 2 nuts.

Torque : 5.4 Nm (55 kgf-cm, 47 in-lbf)

(d) Connect the positive (+) battery cable to the battery terminal.

Torque : 5.6 Nm (57 kgf-cm, 50 in-lbf)

(e) Connect the negative (-) battery cable to the battery terminal.

Torque : 5.6 Nm (57 kgf-cm, 50 in-lbf)

4. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

5. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.

6. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.