Removal

SUSPENSION: FRONT STABILIZER BAR (for AWD): REMOVAL

1. REMOVE FRONT CENTER FLOOR COVER Removal

2. REMOVE NO. 2 ENGINE UNDER COVER Removal

3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH Removal

4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH Removal

5. REMOVE NO. 1 ENGINE UNDER COVER Service and Repair

6. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR Removal

7. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

(a) Remove the 2 nuts and front stabilizer link.





HINT
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

8. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT
Remove the RH side following the same procedures as the LH side.

9. REMOVE FRONT NO. 1 STABILIZER BRACKET LH

(a) Remove the bolt and wire harness bracket.

(b) Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.





10. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

(a) Remove the 2 bolts and the front No. 1 stabilizer bracket RH from the front frame assembly.





11. REMOVE FRONT STABILIZER BAR

(a) Remove the front stabilizer bar from the vehicle.

12. REMOVE FRONT NO. 1 STABILIZER BAR BUSH

(a) Remove the 2 front No. 1 stabilizer bar bushes from the front stabilizer bar.