Installation

LIGHTING: BACK DOOR COURTESY SWITCH: INSTALLATION

1. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY

(a) Connect the connector.





(b) Install the luggage door closer with the 3 bolts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

2. INSTALL BACK DOOR TRIM COVER Installation

3. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH Installation

4. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH Installation

5. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH Installation

6. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH Installation

7. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY Installation

8. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System) Installation

9. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP Installation