P0732-869

L110F HYBRID VEHICLE CONTROL: HYBRID CONTROL SYSTEM: P0732-869: Gear 2 Incorrect Ratio
P0732-869 - Gear 2 Incorrect Ratio

DESCRIPTION

For a description of the hybrid vehicle transmission assembly, P0732-867.





WIRING DIAGRAM

Refer to the wiring diagram for DTC P0732-867 and DTC P0732-868 P0732-867.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC OUTPUT (HV)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.

(d) Check if DTCs are output.

Result:









B -- GO TO DTC CHART Hybrid Control System
A -- Continue to next step.

2. CHECK CONNECTOR CONNECTION CONDITION (HYBRID VEHICLE CONTROL ECU CONNECTOR) P0732-867

NG -- CONNECT SECURELY
OK -- Continue to next step.

3. CHECK CONNECTOR CONNECTION CONDITION (TRANSMISSION WIRE CONNECTOR) P0732-867

NG -- CONNECT SECURELY
OK -- Continue to next step.

4. CHECK HYBRID VEHICLE TRANSMISSION ASSEMBLY (SL1 SOLENOID VALVE, SL2 SOLENOID VALVE)

(a) Disconnect connector E55 from the hybrid vehicle control ECU.





(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- CHECK HARNESS AND CONNECTOR (HYBRID VEHICLE CONTROL ECU - TRANSMISSION WIRE)
OK -- Continue to next step.

5. CLEAR DTC P0732-867

NEXT -- Continue to next step.

6. SIMULATION TEST P0732-867

NG -- REPLACE HYBRID VEHICLE TRANSMISSION ASSEMBLY Components
OK -- Continue to next step.

7. CHECK FOR INTERMITTENT PROBLEMS P0732-867

NG -- REPAIR OR REPLACE MALFUNCTIONING PARTS, COMPONENT AND AREA
OK -- Continue to next step.

8. CHECK FLUID LEAKS P0732-867

NG -- REPAIR OR REPLACE HYBRID VEHICLE TRANSMISSION ASSEMBLY Components

OK -- REPLACE HYBRID VEHICLE CONTROL ECU Service and Repair

9. CHECK HARNESS AND CONNECTOR (HYBRID VEHICLE CONTROL ECU - TRANSMISSION WIRE) P0732-867

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE HYBRID VEHICLE TRANSMISSION ASSEMBLY Components