Installation

SEAT: FRONT SEAT CUSHION HEATER: INSTALLATION

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL FRONT SEAT CUSHION COVER SUB-ASSEMBLY LH

(a) Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.
* As the front passenger side seat has an occupant classification system, its front seat cushion assembly cannot be disassembled.
* If replacing the front passenger side seat, replace the front seat set (cushion assembly, occupant classification ECU and 2 nuts).

2. INSTALL FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH Reassembly

3. INSTALL FRONT SEAT CUSHION ASSEMBLY LH Reassembly

4. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH Reassembly

5. INSTALL FRONT SEAT INNER CUSHION SHIELD LH Reassembly

6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH Installation

7. INSTALL FRONT SEAT FRONT CUSHION SHIELD LH Reassembly

8. INSTALL FRONT SEAT CUSHION SHIELD LH Reassembly

9. INSTALL FRONT SEAT ASSEMBLY LH

(a) Install the front seat assembly Installation.

10. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.

11. CHECK FRONT SEAT ASSEMBLY

(a) Check the power seat operation Operation Check.

(b) Check the climate control seat system Operation Check.