Installation
ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH: INSTALLATION
1. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY
(a) Attach the 4 claws to install the luggage door opening switch.
(b) Install the 2 screws and close the screw caps.
2. INSTALL BACK DOOR GARNISH RETAINER SUB-ASSEMBLY Installation
3. INSTALL LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE
4. INSTALL REAR LIGHT ASSEMBLY RH Installation
5. INSTALL REAR LIGHT ASSEMBLY LH Installation
6. INSTALL TELEVISION CAMERA ASSEMBLY Installation
7. INSTALL BACK DOOR TRIM COVER Installation
8. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH Installation
9. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH Installation
10. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH Installation
11. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH Installation
12. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY Installation
13. INSTALL SWITCH BEZEL Installation
14. INSTALL DOOR INSIDE HANDLE BEZEL Installation
15. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP Installation
16. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
17. INSTALL BATTERY SERVICE HOLE COVER LH Installation
18. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation