Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2012 >> LS 600h V8-5.0L (2UR-FSE) Hybrid >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Actuator >> Testing and Inspection >> Camshaft Oil Control Valve >> On-Vehicle Inspection

On-Vehicle Inspection





2UR-FSE ENGINE CONTROL SYSTEM: CAMSHAFT OIL CONTROL VALVE: ON-VEHICLE INSPECTION

HINT
When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Connect the Techstream to the DLC3.

(b) Put the engine in inspection mode Inspection Mode Procedure.

(c) Start the engine and turn the Techstream ON.

(d) Warm up the engine.

(e) Idle the engine.

(f) Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Exhaust Linear (Bank 1) or Control the VVT Exhaust Linear (Bank 2).

HINT
* VVT EX B1: Command to activate exhaust side oil control valve of bank 1.
* VVT EX B2: Command to activate exhaust side oil control valve of bank 2.

(g) Check the engine speed while operating the Oil Control Valve (OCV) using the tester.

Standard:





If the result is not as specified, check the oil control valve, oil control valve filter, wiring and camshaft timing exhaust gear.
pro multis · About Operation CHARM