Removal

2UR-FSE ENGINE CONTROL SYSTEM: AIR FUEL RATIO SENSOR: REMOVAL

HINT
When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE ENGINE AND TRANSMISSION

(a) Remove the engine and transmission Removal.

2. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

(a) Disconnect the sensor connector.





(b) Using SST, remove the sensor from the exhaust manifold LH.

SST : 09224-00010

3. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

(a) Disconnect the sensor connector.





(b) Using SST, remove the sensor from the exhaust manifold RH.

SST : 09224-00010