Removal

2UR-FSE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

HINT
When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 1 AIR CLEANER INLET Removal

4. REMOVE AIR CLEANER ASSEMBLY LH Removal

5. REMOVE AIR CLEANER ASSEMBLY RH Removal

6. REMOVE VVT SENSOR

(a) Disconnect the 4 sensor connectors.





(b) Remove the 4 bolts and 4 sensors.