Installation

2UR-FSE ENGINE CONTROL SYSTEM: CAMSHAFT OIL CONTROL VALVE: INSTALLATION

HINT
When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)

(a) Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.

(b) Install the oil control valve with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
* Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
* Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)

(a) Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.

(b) Install the oil control valve with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
* Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
* Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

(c) Connect the camshaft timing oil control valve connector.

3. INSTALL NO. 1 AIR CLEANER INLET Installation

4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

5. INSTALL V-BANK COVER SUB-ASSEMBLY Installation