Installation

2UR-FSE EMISSION CONTROL: HYDROCARBON ABSORBER CATALYST SWITCHING VALVE: INSTALLATION

1. INSTALL HYDROCARBON ABSORBER CATALYST SWITCHING VALVE

(a) Install the hydrocarbon absorber catalyst switching valve with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the 2 air hoses to the hydrocarbon absorber catalyst switching valve.

(c) Connect the hydrocarbon absorber catalyst switching valve connector.

2. INSTALL V-BANK COVER SUB-ASSEMBLY Installation