Removal

L110F HYBRID TRANSMISSION / TRANSAXLE: HYBRID MODE SELECT SWITCH: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire) Removal

3. REMOVE BATTERY SERVICE HOLE COVER LH Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* After turning the power switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

8. REMOVE NO. 3 BOX PANEL Removal

9. REMOVE UPPER REAR CONSOLE PANEL Removal

10. REMOVE INSTRUMENT PANEL CUP HOLDER

(a) Disconnect the combination switch connector.





(b) Remove the 4 screws and instrument panel cup holder.





11. REMOVE COMBINATION SWITCH ASSEMBLY

(a) Detach the 4 claws and remove the combination switch assembly.