Removal

STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: REMOVAL

1. REMOVE STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

HINT
Refer to the instructions for removal of the steering column assembly Removal.

2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY

(a) Using a center punch, mark the center of the 2 tapered-head bolts.

(b) Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.

(c) Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the steering column assembly.





3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

(a) Disconnect the ECU connector.





(b) Remove the 2 screws and ECU.