Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU





(a) Install the ECU with the bolt.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the ECU connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

4. INSTALL LOWER INSTRUMENT PANEL Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

6. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Installation

7. INSTALL INSTRUMENT SIDE PANEL RH Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. INSTALL BATTERY SERVICE HOLE COVER LH Installation

11. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

12. CHECK TIRE PRESSURE AFTER REPAIRS

(a) After repairs, confirm that the actual tire pressures are displayed in the DATA LIST Data List / Active Test.