Removal

SEAT BELT: CHILD RESTRAINT SEAT ANCHOR BRACKET: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER LH Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE REAR SEAT ASSEMBLY

(a) for Power Seat:

Remove the rear seat Removal.

(b) for Ottoman:

Remove the rear seat Removal.

(c) for Fixed Seat Type:

Remove the rear seat Removal.

5. REMOVE INNER CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY





(a) for Power Seat, for Fixed Seat Type:

Remove the 2 bolts and 2 anchor brackets.

(b) for Ottoman:

Remove the bolt and anchor bracket.

6. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY





(a) for Power Seat, for Fixed Seat Type:

Remove the 2 bolts and 2 anchor brackets.

(b) for Ottoman:





(1) for Driver Side:

Remove the bolt and anchor bracket.





(2) for Passenger Side:

Remove the 2 bolts and anchor bracket.