Installation

2UR-FSE LUBRICATION: OIL LEVEL SENSOR: INSTALLATION

1. INSTALL ENGINE OIL LEVEL SENSOR

(a) Install a new gasket to the engine oil level sensor.

(b) Insert the engine oil level sensor into the oil pan and rotate it 180°.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(d) Connect the engine oil level sensor connector.

2. ADD ENGINE OIL Replacement

3. INSPECT FOR OIL LEAK Installation

4. CHECK ENGINE OIL LEVEL Testing and Inspection

5. INSTALL FRONT LOWER SUSPENSION MEMBER PROTECTOR Installation

6. INSTALL NO. 1 ENGINE UNDER COVER Installation

7. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH Installation

8. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH Installation

9. INSTALL NO. 2 ENGINE UNDER COVER Installation

10. INSTALL FRONT CENTER FLOOR COVER Installation