Installation

LIGHTING: HAZARD WARNING SWITCH: INSTALLATION

1. INSTALL HAZARD WARNING SWITCH

(a) Attach the 2 claws and install the hazard warning switch.





(b) Connect the connector.

2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY (for HDD) Installation

3. INSTALL MULTI-DISPLAY ASSEMBLY Installation

4. INSTALL RADIO RECEIVER ASSEMBLY Installation

5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

6. INSTALL REAR CONSOLE PANEL UPPER Installation

7. INSTALL NO. 3 BOX PANEL Installation

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL BATTERY SERVICE HOLE COVER LH Installation

13. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation

14. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation