Installation

WIPER AND WASHER: WIPER SWITCH: INSTALLATION

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Attach the claw to install the wiper switch.





(b) Connect the 2 connectors.

2. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)

(a) Attach the claw.





(b) Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.

(c) Attach the 2 claws to install the lower steering column cover.





NOTICE:
Do not damage the tilt and telescopic switch.

(d) Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.

3. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera)

(a) Connect the connector.

(b) Attach the claw.





(c) Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.

(d) Attach the 2 claws to install the lower steering column cover.





NOTICE:
Do not damage the tilt and telescopic switch.

(e) Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.