Steering Wheel Vibrates or Abnormal Noise is Heard from Steering Wheel

STEERING COLUMN: VARIABLE GEAR RATIO STEERING SYSTEM: Steering Wheel Vibrates or Abnormal Noise is Heard from Steering Wheel
- Steering Wheel Vibrates or Abnormal Noise is Heard from Steering Wheel

INSPECTION PROCEDURE

HINT
Check that no DTC is output for the VGRS system and electronically controlled brake system.

PROCEDURE

1. CHECK STEERING WHEEL CONDITION

(a) Center the steering wheel.

(b) Turn the power switch OFF.

(c) Disconnect the steering actuator connectors.

(d) Turn the power switch ON (READY).

(e) Check for abnormal noise or vibration while turning the steering wheel.

OK:

No abnormal noise or vibration.

NOTICE:
DTC C15A5/65 is stored when the power switch is turned ON (READY) with the connector disconnected from the steering actuator. Clear the DTC after this check.

NG -- REPAIR OR REPLACE STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR) Removal

OK -- REPLACE STEERING ACTUATOR (POWER STEERING GEAR ASSEMBLY) Removal