Installation

L110F HYBRID TRANSMISSION / TRANSAXLE: HYBRID MODE SELECT SWITCH: INSTALLATION

1. INSTALL COMBINATION SWITCH ASSEMBLY

(a) Install the combination switch assembly with the 4 claws.





2. INSTALL INSTRUMENT PANEL CUP HOLDER

(a) Install the instrument panel cup holder with the 4 screws.





(b) Connect the combination switch connector.





3. INSTALL UPPER REAR CONSOLE PANEL Installation

4. INSTALL NO. 3 BOX PANEL Installation

5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSTALL BATTERY SERVICE HOLE COVER LH Installation

10. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation

11. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation