Removal

REMOVAL

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. PRECAUTION

NOTICE: After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work.

2. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

3. REMOVE HEADLIGHT ASSEMBLY LH
a. w/ Side Marker Light
b. w/o Side Marker Light

4. REMOVE FRONT AIRBAG SENSOR LH
a. Check that the power switch is off.
b. Check that the cable is disconnected from the battery negative (-) terminal.

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.







c. Remove the 2 bolts.
d. Disconnect the connector to remove the front airbag sensor LH.