Radiator Cooling Fan: Service and Repair

Special Service Tool(s) (Part 1):

Special Service Tool(s)

Removal

WARNING: Do not run the engine while the protective components are removed. Failure to follow these instructions may result in personal injury.

Note: The fan clutch and shroud must be removed as an assembly.

1. Remove the air cleaner.
2. Drain the engine cooling system.





3. Remove the front air deflector.
1 Remove the screws.
2 Remove the front air deflector.

4. Remove the upper radiator hose from the radiator.





5. Remove the fan blade and fan clutch.
1 Use Fan Clutch Holding Tool to hold the water pump pulley steady.
2 Use Fan Clutch Wrench to remove the fan blade and the fan clutch.





6. Remove the fan shroud.
1 Remove the screws.
2 Lift and remove the fan shroud and fan blade out of the vehicle together.
7. Remove the fan and shroud out of the vehicle together.





8. Separate the fan clutch from the fan blade.
1 Remove the bolts.
2 Separate the (A) fan blade from the (B) fan clutch.

Installation





1. Assemble the fan clutch to the fan blade.
1 Position the (A) fan clutch on the (B) fan blade.
2 Install the bolts.
2. Position the fan shroud and the fan blade.





3. Install the fan shroud.
1 Lower the fan shroud onto the radiator clips.
2 Install the screws.





4. Install the fan blade and the fan clutch.
1 Position the fan blade assembly and the fan clutch on the water pump pulley.
2 Use Fan Clutch Holding Tool to hold the water pump pulley steady.
3 Use Fan Clutch Wrench to install the fan blade and fan clutch.

5. Connect the upper radiator hose to the radiator.





6. Install the front air deflector.
1 Position the front air deflector.
2 Install the screws.

7. Fill the engine cooling system.
8. Install the Air Cleaner (ACL).