Module Controlled Functions

Module Controlled Functions
The multi function modules consist of the following:
^ Driver Seat Module (DSM)
^ Generic Electronic Module (GEM)

The drive seat module (DSM) allows automatic positioning of the memory driver seat, both outside memory mirrors and the memory pedals to three programmable positions. For additional information, refer to Seats.

The generic electronic module (GEM) constantly monitors its subsystems for concerns. If a concern is found in one of the subsystems, the GEM will record the concern in the form of a Diagnostic Trouble Code (DTC).

The ignition switch position is very important to the GEM function. Often times, erratic or unexpected GEM function can be traced to problems with these GEM inputs.

The GEM controls the following features:
^ Wipers/washers (front/rear).
^ Warning chimes.
^ Battery saver.
^ Illuminated entry and courtesy lamps.
^ Driver power window.
^ Accessory delay.
^ 4-wheel drive.
^ Heated backlite/mirror.