Remote Anti-Theft Personality (RAP) Module

REMOVAL
1. Disconnect the battery ground cable.

CAUTION:
^ Prior to removal of module, it is necessary to upload module configuration information to scan tool. This information needs to be downloaded into the new module once installed. For additional information; refer to Module Communications Network.
^ Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.







2. Disconnect the Remote Anti-Theft Personality (RAP) module electrical connectors.







3. Remove the nuts and the RAP module.

NOTE: On Expedition and later build Navigators, the antenna is internal to the module and must be replaced as an assembly.

INSTALLATION







1. To install, reverse the removal procedure.

CAUTION: Once the new module is installed it is necessary to download the module configuration information from the scan tool into the new module. For additional information; refer to Module Communications Network.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.