Cabin Temperature Sensor / Switch: Service and Repair

REMOVAL







1. Remove the center instrument panel finish panel.
1 Carefully pry to release the four clips.







2. If equipped, disconnect the 4WD control switch connector.







3. Remove the steering column cover panel.







4. Remove the headlamp switch. For additional information, refer to Lighting and Horns.







5. Remove the LH instrument panel finish panel.
1 Remove the screws.
2 Remove the LH instrument panel finish panel.







6. Remove the center instrument panel finish panel.
1 Remove the screws.
2 Remove the center instrument panel finish panel.







7. Remove the screw.







8. Disconnect the electrical connector and remove the sensor from the hose.

INSTALLATION
1. To install, reverse the removal procedure.