Bushing-Carrier

Special Tools:

Removal

1. Note: It is not necessary to remove the axle assembly from the jack.

Remove the front drive axle assembly.





2. Position the carrier bushing removal tools.
1 Position the Bushing Cup Remover/Replacer.
2 Position the Drawbolt through Bushing Cup Remover/Replacer and the bushing.
3 Thread the Bushing Remover on the Drawbolt.





3. Tighten the Drawbolt to remove the carrier bushing.

Installation





1. Position the carrier bushing and the carrier bushing installation tools.
1 Position the Gauge Ring on the outer face of the bushing flange.
2 Position the Bushing Collet Replacer over the Gauge Ring and the bushing flange.
3 Slide the Bushing Cup Remover/Replacer over the Bushing Collet Replacer.
4 Insert the Drawbolt.
5 Thread the Bushing Replacer on the Drawbolt.





2. Note: The gauge ring will correctly locate the carrier bushing when the Bushing Collet Replacer bottoms out on the carrier.

Tighten the Drawbolt until the Bushing Collet Replacer contacts the carrier.
- Remove the tools.
3. Install the front drive axle assembly.