Alternator: Service and Repair
REMOVAL1. Disconnect the battery.
2. Remove the air cleaner outlet tube assembly.
3. Remove the radiator shroud and cooling fan.
4. Remove the accessory drive belt.
5. Remove the lower generator bracket bolts.
6. Disconnect the harness pin-type retainer.
7. Remove the front generator bolts and the generator.
8. Disconnect the generator electrical connectors.
1 Remove the generator B+ nut and washer assembly.
2 Disconnect the generator stator connector.
3 Disconnect the generator voltage regulator connector.
INSTALLATION
1. To install, reverse the removal procedure.