Third Row
REAR SEAT BACKREST - THIRD ROWDISASSEMBLY
1. Remove the third row seat backrest.
Part 1:
Part 2:
2. Disassemble the components in the order indicated in the illustration and table.
Item 2: Load Floor Rods Disassembly Note
1. Remove the load floor from the seat backrest.
1 Remove the screws.
2 Rotate the rod 90 degrees and pull it out.
Item 4: Head Restraint Sleeves Disassembly Note
1. NOTE:
- The inboard and outboard head restraint sleeves are not interchangeable.
- The head restraint sleeves incorporate an alignment tab that must face forward when installed.
Squeeze together the tip of the head restraint sleeve and pull the sleeve out of the frame tube.
Item 5: Backrest Trim Cover Disassembly Note
1. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat backrest foam pad.
Separate the hook and loop fasteners.
ASSEMBLY
1. To assemble, reverse the disassembly procedure.