Test G

PINPOINT TEST G: ALL BATTERY SAVER COMPONENTS DO NOT OPERATE

Test G1:

Test G2-G5:

Normal Operation
The instrument cluster energizes the battery saver relay through circuit 1005 (VT/OG) when the ignition switch is in the START/RUN position. The battery saver relay provides power to circuit 705 (LG/OG). Circuit 705 (LG/OG) provides power to each demand lamp switch which, when activated, provides power to the selected demand lamp. The demand lamps are grounded through circuit 1205 (BK). The battery saver deactivates the power circuit when the instrument cluster grounds the relay on circuit 1005 (VT/OG) after time-out.

Possible Causes
- battery saver relay
- ignition switch
- instrument cluster
- circuit 1005 (VT/OG)
- circuit 705 (LG/OG)
- circuit 1205 (BK)