Test L

PINPOINT TEST L: LFC 51/DTC B2435 - DRIVER SAFETY BELT BUCKLE SWITCH RESISTANCE OUT OF RANGE

Test L1:

Test L2:

Test L3-L5:

Test L5-L7:

Test L8:

Test L9:

Normal Operation
The restraints control module (RCM) checks the driver safety belt buckle switch circuits for faults. If the RCM detects a current out of range fault, it will store diagnostic trouble code (DTC) B2435 in memory and flash lamp fault code (LFC) 51 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
A driver safety belt buckle switch current out of range fault can be caused by:
- damaged wiring, terminals, or connectors.
- a faulty driver safety belt buckle and pretensioner assembly.
- a faulted RCM.