Front Toe Adjustment

Front Toe Adjustment

NOTE: Air suspension vehicles must be at trim ride height prior to measuring or adjusting the caster, camber or toe.

1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the straight forward position using a suitable holding device.





3. NOTE: Do not allow the steering gear bellows to twist while rotating the spindle tie-rod.

Remove the clamp(s).





4. Loosen the nut(s).
^ Clean and lubricate the nut(s) and spindle tie-rod threads.





5. Rotate the spindle tie-rod(s).
6. Start the engine and center the steering wheel.
^ Recheck the toe settings and adjust if necessary.





7. CAUTION: Make sure to hold the tie-rod end stationary while tightening the nut or damage to the boot can occur.

NOTE: Make sure that the toe settings are not disturbed while tightening the nuts.

Tighten the nut(s).





8. Install the clamp(s).