Fuel Pump: Service and Repair
FUEL PUMP MODULEWrench, Fuel Tank Sender Unit:
Special Tool(s)
Removal and Installation
WARNING: Do not smoke, carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and can be ignited. Failure to follow these instructions may result in personal injury.
1. Remove the fuel tank.
2. Disconnect the fuel and vapor tubes from the fuel pump module.
3. Using the special tool, remove the fuel pump lock ring.
4. CAUTION:
- Note the location of the fuel pump alignment tabs.
- Carefully remove the fuel pump assembly to avoid damaging the fuel level sensor.
Remove the fuel pump module assembly.
- Remove and discard the O-ring seal.
5. To install, reverse the removal procedure.