Intermediate Clutch Assembly

Intermediate Clutch Assembly





Material








Intermediate Clutch Assembly (C Clutch)

Disassembly





1. Remove the bearing race. Clean and inspect for damage.
^ If damage is indicated, a new intermediate clutch assembly will be required.





2. Remove the intermediate clutch plate snap ring.





3. NOTE: Inspect the intermediate clutch drum/center support, friction plates and steel plates for damage. No new components are installed at this time. If new components are required, a new intermediate clutch center support assembly is required.

Remove the intermediate clutch plates, steel and friction. Inspect the steel and friction plates for damage. If damage is indicated, a new intermediate clutch assembly will be required.
^ If no damage is indicated, the intermediate clutch can be re-assembled.

Assembly





1. Install the intermediate clutch plates, starting with the wave spring then a steel plate and alternating between friction and steel plates, and ending with the pressure plate.





2. Install the intermediate clutch plate snap ring.





3. Install the bearing race.