Roof Opening Panel Alignment - Height Adjustment

ROOF OPENING PANEL ALIGNMENT - HEIGHT ADJUSTMENT

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed, or when a new roof opening panel assembly has been installed. Refer to Roof Opening Panel Motor Initialization. Programming and Relearning







1. Loosen the four roof opening panel bolts.







2. Position the roof opening panel to the roof panel as specified.







3. Maintain the roof opening panel position and tighten the four roof opening panel bolts.
4. Reinitialize the roof opening panel motor.