Air Cleaner Housing: Service and Repair

AIR CLEANER







Exploded View

Removal and Installation
1. Remove the air cleaner intake pipe.
2. Disconnect the mass air flow (MAF) electrical connector.
3. Disconnect the crankcase vent tube from the air cleaner housing.
4. Remove the 4 bolts and the air cleaner housing.
- To install, tighten to 10 Nm (89 lb-in).

5. If servicing the air cleaner housing, remove the 2 bolts and the MAF sensor.
- To install, tighten to 3 Nm (27 lb-in).

6. To install, reverse the removal procedure.