Low/Reverse Clutch Assembly

Low/Reverse Clutch Assembly





Material








Low/Reverse Clutch Assembly (D Clutch)

Disassembly

NOTE: Low/reverse clutch plates are installed in case during assembly procedure.





1. Remove the roller bearing on the intermediate clutch center support. Clean and inspect for damage.
^ If damage is indicated, a new intermediate clutch center support assembly will be required.

2. NOTE: Inspect the low/reverse clutch plates, friction plates and steel plates for damage. No new components are installed at this time. If new components are required, a new transmission assembly is required.

Inspect the intermediate clutch plates, steel and friction for damage. If damage is indicated, a new transmission assembly will be required.
^ If no damage is indicated, the low/reverse clutch can be re-assembled.