Front Door Panel: Service and Repair

Removal

Inside Door Handles:

1. Remove interior door handle.

Door Electrical Connections:

2. Disconnect any electrical connections in door panel.
3. If installed, remove remote mirror control bezel nut and bezel.
4. Using putty knife or similar tool, carefully pry trim panel retaining clips from door inner panel.

Note: Do not use trim panel to pry clips from door inner panel. Replace any bent, damaged or missing push pins.

2 Door Trim Panel - Low Series:

Front Door Trim Panel:

Rear Door Trim Panel:

5. Remove trim panel from door.

Installation

1. Position trim panel to door and connect electrical connections.
2. Push trim panel push pins into inner door panel holes.
3. Install remote mirror control bezel and nut (if removed).
4. Install interior door handles.