Engine Crankcase - Pressure Test Adapter Tool
Article No. 85-10-10CRANKCASE PRESSURE TEST ADAPTER TOOL (2.4L DIESEL) - MODIFICATION TO THE ORIFICE OF ROTUNDA ADAPTER TOOL
LINCOLN-MERCURY 1984 CONTINENTAL, MARK VII
The crankcase pressure test adapter (part number 10325 which is part of Rotunda kit number 019-00002) was released with an orifice smaller than the intended diameter of 7/32 inches.
Figure 10 - Crankcase Pressure Test Adapter:
In order to obtain an accurate reading of crankcase pressure when performing the test, the adapter must be modified by drilling the orifice using a 7/32" drill as shown in Figure 10. Use compressed air to clean any metal chips from inside the adapter.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"