Air Spring - Fill Procedure Revisions
84ford18Article No. 84-4-15
SUSPENSION - AIR SPRING FILL PROCEDURE - SHOP MANUAL REVISIONS (SECTION 14-40)
LINCOLN-MERCURY 1984 CONTINENTAL, MARK VII
The following is a revised procedure for the air spring fill sequence when servicing these vehicles.
Page 14-40-51 Sub-title Air Spring Fill
NEW Step 9 Immediately after completion of
the air spring fill, turn the air suspension service switch off to prevent deflation of the air springs while on the hoist. Inspect all air springs to be sure they are properly inflated.
Step 10 DELETE
ADD NEW NOTE: Any further leveling
(vent or compression) will be done when the vehicle is in normal operation on the ground. (Air suspension switch returned to ON after vehicle is on the ground).
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"