Wiper/Washer - Jets Aimed Too High

84ford13 Article No. 84-14-7


WIPER/WASHER JET AIM TOO HIGH


FORD 1984 THUNDERBIRD

LINCOLN-MERCURY 1984 COUGAR, MARK VII

Figure 5:

Some vehicles may have the washer jets aimed too high causing washer solvent overspray during washer operation. To service this condition, refer to Figure 5 and install new washer jets as outlined below.

1. Remove screws, Item A, and return.
2. Remove hoses from washer nozzles, Item B.
3. Discard washer nozzles, Item B.
4. Install two new nozzles, E4SZ-17603-B, and retain with screws, Item A.


PART NUMBER PART NAME CLASS

E4SZ-17603-B Washer Jet A


OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP17603A84
TIME: 0.3 Hr. DLR. CODING: Basic Part No. 17603 Code: 36