Cylinder Head - Revised Installation Procedure
84ford2Article No. 84-24-4
CYLINDER HEAD (2.4L DIESEL) - REVISED CAR SHOP MANUAL INSTALLATION PROCEDURE
LINCOLN-MERCURY 1984-85 CONTINENTAL, MARK VII
The following is a revision to Engine Section Page 22-07- 14 of the 1984 Car Shop Manual Book D1 and 22-07-15 of the 1985 Car Shop Manual Book D.
FIGURE 2:
Install and tighten cylinder head bolts in sequence to 50-60 N-m (36-43 lb.ft.). Wait 15 minutes and tighten bolts in sequence 90~. Run the engine for 15-20 minutes and turn bolts in sequence another 90~.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"