Installation

1. Transfer three foam core seals to new heater core.
2. Install heater core and secure into evaporator case.

Fig 27 Heater Core Access Cover Removal:

3. Position heater core access cover on evaporator case and install four retaining screws (illustration).

Fig 24 Electric Blend Door Actuator Attachment:

4. Position blend door actuator to blend door shaft. Install three screws retaining blend door actuator to evaporator case (illustration).





5. Install seal on heater core tubes (illustration).

Fig 26 Vacuum Line Removal From Heater Core Seal:

6. Install vacuum source line through heater core tube seal (illustration).
7. Install evaporator case assembly into vehicle as outlined. Installation
8. Install instrument panel into vehicle as outlined. See Instrument Panel.