Powertrain Management: Technical Service Bulletins

• Recalls
  • Emissions
    • Recall - Catalyst Inspection/Replacement
      • Overview
      • Administrative Info Attachment I
      • Labor, Parts and Return Instruction, Attachment II
      • Description of Recall
      • Inspection Only Authorized Modifications Decals
      • Owner Letter
    • Recall - Catalyst Inspection and/or Replacement
      • Overview
      • Administrative Information - Attachment I
      • Labor and Parts Information - Attachment II
      • Technical Information - Attachment III
        • 87-89 Mustang 2.3L Non-Turbo
        • 86-89 Mustang 5.0L and 86 Capri HO Engine - Federal
        • 86-89 Mark VII 5.0L HO Engine - Canadian & Federal
      • Owner Letter
      • Dealer Letter
  • Generals
    • Campaign - Throttle Lever Grommet Replacement
      • Overview of Program 93B31
      • Attachment I - Administrative Information
      • Attachment II - Labor and Parts Information
      • Attachment III - Technical Instructions
      • Owner Letter
  • Safety
    • Recall 87V139000: Fuel Line Coupling Retainer Clips
• Customer Interest
  • Fuel Pump - Buzzing/Humming After Engine Shut Down
  • Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
    • Overview
    • Procedures, Warranty and Labor
    • Idle Speed Adjustment
    • Procedure # 1
    • Procedure # 2 Idle Air By-Pass Valve Cleaning Only
    • Warranty Coverage
    • Labor Standards Operations
    • Operation Description
  • Fuel Gauge - Intermittently Shows Increase In Fuel Level
  • Electronic Fuel Gauge - Will Not Display Full
  • Electronic Fuel Gauge - Erratic Readings
  • Engine - High Idle/MIL ON
  • Engine - Intermittent High Idle/MIL ON
  • Engine - Rough Idle/Hesitation/Backfire/Stalling
  • Engine - Spark Knock On Acceleration
• By Symptom
  • Customer Interest
    • Fuel Pump - Buzzing/Humming After Engine Shut Down
    • Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
      • Overview
      • Procedures, Warranty and Labor
      • Idle Speed Adjustment
      • Procedure # 1
      • Procedure # 2 Idle Air By-Pass Valve Cleaning Only
      • Warranty Coverage
      • Labor Standards Operations
      • Operation Description
    • Fuel Gauge - Intermittently Shows Increase In Fuel Level
    • Electronic Fuel Gauge - Will Not Display Full
    • Electronic Fuel Gauge - Erratic Readings
    • Engine - High Idle/MIL ON
    • Engine - Intermittent High Idle/MIL ON
    • Engine - Rough Idle/Hesitation/Backfire/Stalling
    • Engine - Spark Knock On Acceleration
  • Driveability
    • Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
      • Overview
      • Procedures, Warranty and Labor
      • Idle Speed Adjustment
      • Procedure # 1
      • Procedure # 2 Idle Air By-Pass Valve Cleaning Only
      • Warranty Coverage
      • Labor Standards Operations
      • Operation Description
    • Engine - High Idle/MIL ON
    • Engine - Intermittent High Idle/MIL ON
    • Engine - Rough Idle/Hesitation/Backfire/Stalling
  • Erratic Operation
    • Fuel Gauge - Intermittently Shows Increase In Fuel Level
    • Electronic Fuel Gauge - Erratic Readings
  • False instrument warning light/gauges
    • Fuel Gauge - Intermittently Shows Increase In Fuel Level
    • Electronic Fuel Gauge - Will Not Display Full
    • Engine - Intermittent High Idle/MIL ON
  • Loose
    • Engine - Intermittent High Idle/MIL ON
  • Low, Dead battery
    • Fuel Pump - Buzzing/Humming After Engine Shut Down
  • Noise
    • Fuel Pump - Buzzing/Humming After Engine Shut Down
    • Engine - Spark Knock On Acceleration
  • Poor performance
    • Engine - Rough Idle/Hesitation/Backfire/Stalling
  • Recalls
    • Campaign - Throttle Lever Grommet Replacement
      • Overview of Program 93B31
      • Attachment I - Administrative Information
      • Attachment II - Labor and Parts Information
      • Attachment III - Technical Instructions
      • Owner Letter
    • Recall - Catalyst Inspection/Replacement
      • Overview
      • Administrative Info Attachment I
      • Labor, Parts and Return Instruction, Attachment II
      • Description of Recall
      • Inspection Only Authorized Modifications Decals
      • Owner Letter
    • Recall - Catalyst Inspection and/or Replacement
      • Overview
      • Administrative Information - Attachment I
      • Labor and Parts Information - Attachment II
      • Technical Information - Attachment III
        • 87-89 Mustang 2.3L Non-Turbo
        • 86-89 Mustang 5.0L and 86 Capri HO Engine - Federal
        • 86-89 Mark VII 5.0L HO Engine - Canadian & Federal
      • Owner Letter
      • Dealer Letter
    • Recall 87V139000: Fuel Line Coupling Retainer Clips
  • Starting problems
    • Fuel Pump - Buzzing/Humming After Engine Shut Down
  • Sticking/Binding
    • Fuel Pump - Buzzing/Humming After Engine Shut Down
• All Technical Service Bulletins
  • Driveability TSB's - Summary
    • Overview
    • 1.3L
    • 1.6L
    • 1.6L EFI Turbo
    • 1.9L CFI
    • 1.9L EFI
    • 2.0L
    • 2.2L
    • 2.3L
    • 2.3L EFI Turbo
    • 2.3L HSC
    • 2.5L CFI
    • 2.5L HSC
    • 2.8L EFI
    • 2.9L EFI
    • 3.0L
    • 3.8L
    • 4.9L
    • 5.0L
    • 5.8L
    • 6.9L Diesel
    • 7.3L Diesel
    • 7.5L
  • Fuel Pump - Buzzing/Humming After Engine Shut Down
  • TPS Mounting Screws - Hard to Remove
  • Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
    • Overview
    • Procedures, Warranty and Labor
    • Idle Speed Adjustment
    • Procedure # 1
    • Procedure # 2 Idle Air By-Pass Valve Cleaning Only
    • Warranty Coverage
    • Labor Standards Operations
    • Operation Description
  • Fuel Pump/Sender - Defective Parts Return
    • Remanufacturer Letter # 1
    • Remanufacturer Letter # 2
    • Dealer Letter # 1
    • Dealer Letter # 3
  • Fuel Gauge - Intermittently Shows Increase In Fuel Level
  • MAP Sensor - Pinpoint Test DF Manual Correction
  • Fuel Injector - New Cleaning Method
  • Fuel Injectors - Rotunda Injector Tester/Cleaner
  • Engine - Rough Idle or Stumble
  • Fuel Injector Cleaner - Parts and Service Tips
  • Body/Frame - Arc Welding Precautions
  • EGO Sensors - Silicone Contamination
  • EVP Sensor - Manual Revision
    • Overview
    • 1985 Pinpoint Tests - DM - EGR, EVP and EVR
    • 1985 Pinpoint Tests - Fa - Neutral Drive Switch -A/C Input
    • 1986 (EGR) Systems Functional Diagnosis
    • 1986 Quick Test: Continuous Self-Test 6.0
    • Pinpoint Test - DN - EGR - EVP & EVR
      • Overview
      • 1987 (EGR) Systems - Functional Diagnosis
      • 1987 Quick Test: Continuous Self-Test - 6.0
      • Pinpoint Test - DN - EGR - EVP & EVR
      • 1988 Functional Diagnosis
        • (EGR) Systems - Functional Diagnosis
        • Quick Test:Continuous Self-Test - 6.0
        • Pinpoint Test - DN - EGR - EVP & EVR
      • 1989 Functional Diagnosis
        • (EGR) Systems - Functional Diagnosis
        • Quick Test:Continuous Self-Test - 6.0
        • Quick Test:Diagnostic By Symptom - 7.0
        • Pinpoint Test - DN - EGR - EVP & EVR
  • EEC IV Pinpoint Test Step KE15 - Revised
  • Speed Sensor Resistance Reading - Manual Revision
  • Distributor Gear - Service Tips
  • Campaign - Throttle Lever Grommet Replacement
    • Overview of Program 93B31
    • Attachment I - Administrative Information
    • Attachment II - Labor and Parts Information
    • Attachment III - Technical Instructions
    • Owner Letter
  • EEC IV EGR Pinpoint Test - Manual Correction
  • Recall - Catalyst Inspection/Replacement
    • Overview
    • Administrative Info Attachment I
    • Labor, Parts and Return Instruction, Attachment II
    • Description of Recall
    • Inspection Only Authorized Modifications Decals
    • Owner Letter
  • Recall - Catalyst Inspection and/or Replacement
    • Overview
    • Administrative Information - Attachment I
    • Labor and Parts Information - Attachment II
    • Technical Information - Attachment III
      • 87-89 Mustang 2.3L Non-Turbo
      • 86-89 Mustang 5.0L and 86 Capri HO Engine - Federal
      • 86-89 Mark VII 5.0L HO Engine - Canadian & Federal
    • Owner Letter
    • Dealer Letter
  • EEC IV - Revised Pinpoint Test Steps
  • EEC IV Code 14 Diagnostics - Manual Correction
  • Electronic Fuel Gauge - Will Not Display Full
  • Electronic Fuel Gauge - Erratic Readings
  • Fuel Tank Sending Unit - Connector Replacement
  • EEC IV Continuous Self Test Code - Revised
  • VECI - Replacement Decal Index
    • Overview
    • Engine Size:1.9L
    • Engine Size:2.3L
    • Engine Size:2.5L
    • Engine Size:2.9L
    • Engine Size:. 3.0L
    • Engine Size:3.8L
    • Engine Size:4.9L
    • Engine Size:5.0L
    • Engine Size:5.8L
    • Engine Size:7.5L
  • VECI Decal - Initial Replacement Index
    • Overview
    • 1989-Model Vehicle Emission Control Information (VECI) Decals
      • Engine Sizes:1.9L, 2.3L, 2.5L, 2.9L & 3.0L
      • Engine Sizes:3.8L, 4.9L, 5.0L, 5.8L & 7.5L
  • Emission Control System - Technician's Glossary
    • 91FORD13 A
    • B
    • C
    • D
    • E
    • F
    • H
    • I
    • K
    • L
    • M
    • N
    • O
    • P
    • Q
    • R
    • S
    • T
    • U
    • V
    • W
    • Z
  • Key On Engine Off Self Test Procedure - Manual Revision
  • Electronic Modules - Protection From Static Electricity
  • Fuel Pressure Specification - Corrections
  • Engine - High Idle/MIL ON
  • Engine - Intermittent High Idle/MIL ON
  • Vehicle - Welding Precautions
  • Electrical/Electronic/Fuel Induction - Glossary
    • Overview
    • A
    • B
    • C
    • D
    • E
    • F
    • G
    • H
    • I
    • J
    • K
    • L
    • M
    • N
    • O
    • P
    • Q
    • R
    • S
    • T
    • U
    • V
    • W
    • X
    • Z
  • Recall 87V139000: Fuel Line Coupling Retainer Clips
  • Engine - Rough Idle/Hesitation/Backfire/Stalling
  • Ignition Timing - Procedure/Diagnostics Correction
  • Ignition Timing Procedure - Manual Update
  • Engine - Spark Knock On Acceleration
  • Fuel - California Reformulated Gasoline
  • Fuel - Volatility Related Driveability Concerns