Headlamp Switch: Service and Repair

1. Disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Disconnect battery ground cable.
3. Insert a hooked tool into headlight switch knob slot and remove spring tension on knob, then pull off.
4. Remove steering column lower shroud and lower lefthand instrument panel trim bezel.
5. Remove five headlight switch mounting bracket retaining screws.
6. Carefully pull switch and bracket from instrument panel and disconnect switch wiring.
7. Remove locknut and screw retaining switch to switch bracket.
8. Reverse procedure to install. Rearm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.