Suspension: Tools and Equipment

Use only the test equipment referred to. Use of any other test tool may result in serious damage to the automatic leveling system.
To correctly perform the following diagnostic Pinpoint tests, the following test equipment is required:
1. Test lamp using bulb part No. 194 with probes. Attach two 25-30 inch leads, one with a pointed probe and the other with a test clip, to a No. 194 bulb for use as a test lamp. Any other test lamp will cause damage to the load leveling system.
2. Digital volt-ohmmeter tool No. 007-00001 or equivalent, with pointed probes to measure DC voltage.
3. Jumper cable with test clips.