Radio, Stereo, and Compact Disc: Service and Repair

Radio Removal

Stereo And Compact Disc Player:

1. Disconnect battery ground cable.
2. Remove center instrument trim panel.
3. Use Radio Removal Tools T87P-19061-A or equivalent to remove radio from instrument panel.
4. Pull radio to front and raise back en of radio slightly so rear support bracket clears track in instrument panel. Pull radio out of instrument panel slowly.
5. Disconnect wiring connectors and antenna cable and remove rear support bracket.



Installation

1 Connect wiring connectors and antenna cable to radio. Install rear support bracket.
2 Slide radio into instrument panel until spring clips on both sides of the radio are fully seated
3 Install center instrument trim panel.
4 Connect battery ground cable. Test radio and/or tape player for operation.