Left Front

Removal

WARNING: THE ELECTRICAL CIRCUIT NECESSARY FOR SYSTEM DEPLOYMENT IS POWERED DIRECTLY FROM THE BATTERY AND BACKUP POWER SUPPLY. TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BATTERY GROUND CABLE AND BACKUP POWER SUPPLY MUST BE DISCONNECTED PRIOR TO SERVICING OR REPLACING ANY SYSTEM COMPONENTS.

1. Disconnect battery ground cable and backup power supply.
2. Disconnect LH front sensor electrical connector.
3. Remove two nuts attaching LH front sensor to LH tender apron and remove sensor from vehicle.

Installation
1. Position LH sensor to LH tender apron and secure with two nuts. Tighten nuts to 9-14 N.m (7-10 lb-ft).
2. Connect LH front sensor electrical wiring connector to wiring assembly connector.
3. Connect backup power supply and battery ground cable.
4. Verify air bag indicator lamp.